Vending machine telemetry and IoT devices

Vending machine telemetry tells an operator what each machine has sold, what it needs and when it fails, without a site visit. We design the controllers, payment interfaces, sensor boards and data loggers behind it, for vending operators, machine builders and anyone who needs equipment to report from the field.

Telemetry gateway in a black enclosure with an antenna connector and labeled ports

What we design

Telemetry modules

Boards that sit inside a machine, read its sales and fault data, and send it to your server.

Vending controller board with DIP switches and wire-to-board connectors

Machine controllers

Boards that run the machine itself, with motor and relay outputs, coin and card device connections, and a service menu.

Payment interfaces

Connections between the machine and contactless card readers or cashless payment systems.

Cellular data logger

A standalone unit that records sensor readings and events and sends them over the mobile network, with local storage when coverage drops.

Sensor interface boards

Temperature, humidity, current and level sensors read through analog front-ends or I2C, with an OLED display where the device needs one.

Gateways

Units that collect data from local devices over RS-485, LoRa or Wi-Fi and forward it over Ethernet or cellular.

An IoT telemetry device that keeps working

A device in the field has to survive without attention. Each IoT telemetry device we design is planned around four questions:

Power

Mains, battery or both, with sleep modes that let a battery unit run for its full service interval.

Connectivity

GSM cellular, Wi-Fi or LoRa, chosen for the site, with retries, buffering and reconnection when the link drops.

Updates

Firmware that can be updated remotely, with a safe fallback if an update fails.

Data

Messages over MQTT or HTTP in a format your server or cloud platform can take directly.

From pilot to fleet

A telemetry project usually starts with a handful of units on real machines. We build the pilot units, and the first weeks of data show what the field changes: signal strength inside metal cabinets, power interruptions, unexpected machine states. Those findings go into the design before a larger batch is built.

Telemetry gateway in a black enclosure with an antenna connector and labeled ports

Vending controller board with DIP switches and wire-to-board connectors

Standards we design for

Connected devices sold in the EU fall under the Radio Equipment Directive, which covers radio, EMC and electrical safety together. We use pre-certified radio modules where we can, which shortens the radio part of the approval, and check emissions and immunity before the formal test. See compliance testing.

Services used for telemetry projects

Electronic device design

For the module or logger as a whole. Read more

Embedded firmware

For the machine protocols, sensors, cellular link and remote updates. Read more

Prototyping

To try radios, sensors and power budgets before the custom board. Read more

Enclosure design

For housings that fit inside a machine or mount outdoors. Read more

Functional testing

To check every unit's sensors, inputs and connection before it ships. Read more

What you receive

Design source and manufacturing files, firmware source and binaries, the message format your server receives, and test procedures. Prototypes are delivered assembled and tested, ready for a pilot on your machines or sites.

Sensor interface board showing a humidity setting on its OLED display, running our firmware