Electronic product design and development

End-to-end electronic product design and development: hardware, firmware, enclosures, prototypes, assembly.

What we do

A device succeeds when its electronics, firmware and housing are designed together. We do all three, and we build and test what we design, so problems are found on the bench and not in the field.

Design

  • Electronic device design: requirements, architecture, component selection and a complete design, ready to prototype.
  • PCB design: schematics and layouts from 2 to 6 layers, checked for manufacture and test.
  • Embedded firmware: drivers, communication stacks and control logic for STM32, ESP32 and other microcontrollers.
  • Enclosure design: housings for DIN rail, wall, panel and handheld devices, from 3D-printed samples to production files.
Schematic and matching PCB layout of a controller board in the design tool

Build

  • Prototyping: proof-of-concept builds that answer the risky technical questions before a custom board is laid out.
  • SMT assembly and through-hole assembly: prototypes and pilot units in-house, larger runs at partner factories.
  • Box build assembly: boards, wiring, displays and connectors fitted into the enclosure and tested as a finished unit.
Wiring and harness work in progress on the assembly bench

Test

  • Functional testing: test procedures, fixtures and scripts that prove every unit works before it ships.
  • Compliance testing: EMC and electrical safety pre-compliance checks, and preparation for CE marking at an accredited laboratory.
Electrical safety measurement on a controller board with an installation tester

Industries we design for

Most of our work is in four fields, where reliability and regulation matter as much as function:

How a project runs

Each stage ends with something you can review before the next one starts. You can stop after any stage and take the results elsewhere.

  1. Requirements

    We agree what the device must do, where it will be used and which standards apply. You receive a written specification.

  2. Architecture

    We choose the main components, interfaces and power design. You receive a block diagram and a component plan with costs and availability.

  3. Design

    Schematic, PCB layout, firmware and enclosure. You review each before release.

  4. Prototype

    We build and bring up the first units. You receive working devices and a bring-up report.

  5. Validation

    Functional tests and pre-compliance checks. You receive the test results and the fixes made.

  6. Handover

    You receive the full design source and a manufacturing package, and we can manage the first production run with a partner factory.

Why work with an electronics design company in Chisinau

Choosing a nearshore electronics engineering partner should lower your risk, not move it. Here is what working with us from Chisinau means in practice.

Your working hours

We work Eastern European Time, the same as Bucharest and one hour ahead of Berlin and Paris. Calls and replies happen during your day.

CE from the first schematic

We design for the EMC Directive, the Low Voltage Directive and, for radio products, the Radio Equipment Directive, with RoHS-compliant parts.

Cost

Our engineering rates are below Western European ones, for the same deliverables and standards.

What protects your project

A non-disclosure agreement first

We sign an NDA before you send any design files.

Files you can build from without us

Schematics and layout source, Gerber files, BOM with alternatives, 3D models, firmware source and test procedures.

Pre-compliance before the laboratory

EMC and safety problems are found in our lab, when they are cheaper to fix.

Design for manufacture

Every board is checked for assembly and test, and released as a package any qualified factory can build.

Electronics design in Moldova, for clients in Europe

We are a hardware development partner for product companies, funded startups, OEMs and system integrators. Some come with a finished schematic that needs a layout and a first batch. Others come with a requirement and need the whole device. Tell us where you are, and we will tell you what the next step costs and how long it takes. The quote is free, and you receive it within two working days.